An antique galvanised iron and brass castellated floor lamp. Early 20th century. Excellent condition and colour. Cleaned, waxed. Rewired; 4.5m fabric flex, safety-swase is 14″/35.5cm diameteritched BC lampholder, 3amp plug. Pat tested. Dimensions in inches/cms; 63″/160cm tall. Base is 14″/35.5cm diameter (not inc. disc feet – protrude a bit). 12.84kg. Click photos to enlarge…
For sale. See www.haes.co.uk for details or click link below
An exceptional wrought iron and brass adjustable floor lamp in original paint. c1900. Incredible early electric lighting. Great colour. No damages or losses. Works perfectly. Cleaned, waxed (clear microcrystalline) and rewired; 4.5m burgundy fabric flex, original 3 BC lampholder cluster retained, phenolic 3A plug. PAT tested. A duplex ringed shade will fit atop of the original 3-armed shade carrier (see images). Dimensions in inches/cms; Min. height; 67″/170cm as is w/o shade (poss a bit lower). Max. height; 80″/203cm. 19.5″/49cm wide x approx. 20″/51cm deep. 16.52kg. Click photos to enlarge…
For sale. See www.haes.co.uk for details or click link below
https://www.haes.co.uk/42407-iron-brass-nouveau-floor-lamp/item
A good quality decorative billiard / pool light with four glass coolie shades. English, mid 20th century – possibly a little earler. A great kitchen / dining room table or island light. Very good quality cast brass fittings. All in good order. Cleaned, lightly polished, full rewire (BC lampholders), PAT tested. Dimensions in inches/cms; 40.5″/103cm wide inc. shades (35.5″/90cm wide – fixture only). 26″/66cm depth inc. shades (18″/46cm deep – fixture only). 24″/61cm max height. The oval cast brass ceiling fixing plate is 6″/15cm x4.5″/11.5cm. Weight inc. shades approx. 12kg (w/o shades 6.5kg). Click photos to enlarge…
For sale. See www.haes.co.uk for details or click link below
https://www.haes.co.uk/42406-billiard-pool-kitchen-light/item
A pair of large waisted crystal glass lamps with nickel plated brass caps designed by Carl Fagerlund for Orrefors. Swedish, 1960s. Signed to the caps and etched to bases also plus registered design number, small label also on one. One base is slightly bigger than the other. Cleaned and rewired with 3m fabric flex, safety switched lampholders, 3 amp plugs. Dimensions in inches/cms; 16.75″/50cm tall inc. lampholder (16.5″/41.5cm base height only). 5.5″/14cm base diameter (max). Weight is 3.96kg and 4.1kg. I also have two other smaller versions of this lamp (could make a pair / close pair – see two separate listings. Click photos to enlarge…
For sale. See www.haes.co.uk for details or click link below
https://www.haes.co.uk/42349-waisted-crystal-lamps-by-orrefors/item
A pair of elegant cast gilt brass neoclassical lamps with tapered fluted columns and circular bases with beading and leaf / lambs tongue perimeters. French, 1920s-30s? Excellent condition, rewired with 2.5m fabric flex, patinated brass safety-switched lampholders, traditional phenolic 3amp plugs. PAT tested. Dimensions in inches/cms; 16.5″/41cm tall inc. cord grip. 4.75″/12cm base diameter. Weight is 1.14 and 1.2kg. Click photos to enlarge…
For sale. See www.haes.co.uk for details or click link below
https://www.haes.co.uk/42348-pair-french-neoclassical-lamps/item
A set of conical opal / white glass shade pendant lights with original gilt brass caps / galleries. 1950s. Cleaned and wired with 1.25m fabric flex and BC lampholder. I can supply different coloured flex if required. Ready to go. Dimensions in inches/cms; 9.75″/25cm tall inc. cord grip. 5.5″/14cm diameter. Weight is approx. 0.48kg each. Priced individually. 28 available. Please see separate page for the same pendant shade with stems. Please note I have a further set of these shades suitable for wall lights (see separate page). Click photos to enlarge…
For sale. See www.haes.co.uk for details or click link below
https://www.haes.co.uk/42347-conical-opal-pendant-lights/item
A set of conical opal / white glass shade pendant lights with original gilt brass caps / galleries and stems. 1950s. Cleaned and wired with 1.25m fabric flex and BC lampholder. I can supply different coloured flex if required. Ready to go. Dimensions in inches/cms; 13.75″/35cm tall inc. cord grip. Shade only is 9″/23cm tall by 5.5″/14cm diameter. Weight is approx. 0.52kg each. Priced individually. 28 available. Please see separate page for the same pendant shade without the stems. Please note I have a further set of these shades suitable for wall lights (see separate page). Click photos to enlarge…
For sale. See www.haes.co.uk for details or click link below
https://www.haes.co.uk/42346-conical-opal-pendant-lights-stemmed/item
A set of antique silvered / mirrored saucer or dished shades by STRAND ELECTRIC LONDON and labelled as such on each shade within red shield shaped labels. English approx. 1930-40s. The shades were silvered to the outside and then protected by paint and sometimes a layer of copper too. Up to 15 available, some with paint losses and the silver tarnished to a champagne / gold colour. Most retain the red labels. Wired with bronzed brass ES lampholders/cordgrips, bronzed brass galleries and 1.25m bergundy fabric flex. Different flex length / colour can be supplied. **These are wired with patinated brass ES lampholders to facilitate use of small crown silvered “golf ball” type of bulbs which are not available in a BC fitting. The smaller bulb keeps it more within the shade for better looks and reflection. Slightly dearer so if you don’t need a small crown silvered bulb or any other ES bulb specifically go for the BC lampholder option (separate advert). Dimensions in inches/cms; 8.5″/21.5cm diameter. 4.5″/11.5cm tall inc cordgrip. Weight is approx. 0.5kgeach. Priced individually. I also have 5 slightly deeper dished shades that would be suitable for wall lights and can be made up to suit with brass arms etc. Click photos to enlarge…
For sale. See www.haes.co.uk for details or click link below
A set of conical opal / white glass shade wall lights with original gilt brass cap / gallery and wall plate. 1950s. Cleaned and wired. Ready to go. Can supply with suitable brass screws. Dimensions in inches/cms; 11.25″/28.5cm tall. 8.5″/22cm max projection from wall. Shade only is 9″/23cm tall by 5.5″/14cm diameter. Weight is approx. 0.54kgeach. Priced individually. 25 available. Please note I have a further set of these shades and fittings suitable for hanging / pendant lights (see separate adverts – 2 versions). Click photos to enlarge…
For sale. See www.haes.co.uk for details or click link below
A set of antique silvered / mirrored saucer or dished shades by STRAND ELECTRIC LONDON and labelled as such on each shade within red shield shaped labels. English approx. 1930-40s. The shades were silvered to the outside and then protected by paint and sometimes a layer of copper too. Up to 15 available, some with paint losses and the silver tarnished to a champagne / gold colour. Most retain the red labels. These ones are wired with bronzed brass BC lampholders / cordgrips, bronzed brass galleries and 1.25m black fabric flex. Different flex length / colour could be supplied. Dimensions in inches/cms; 8.5″/21.5cm diameter. 4.5″/11.5cm tall inc cordgrip. Weight is approx. 0.5kgeach. Priced individually. ** Please note I can also supply these wired with patinated brass ES lampholders (see separate advert) to facilitate use of small crown silvered “golf ball” type of bulbs which are not available in a BC fitting. The smaller bulb keeps it more within the shade for better looks and reflection. The images here show regular golf ball and candle bulbs as well as the larger BC crown silver bulb. The smaller ES crown silver bulbs / ES lampholders are shown in a separate advert with similar shades.** I also have 5 slightly deeper dished shades that would be suitable for wall lights and can be made up to suit with brass arms etc. Click photos to enlarge…
For sale. See www.haes.co.uk for details or click link below
